EM Routines and Codes

[Local Free Software]
[Non-local Software]
[Software from Books]
[EMLIB Home Page]

Local Free EMLIB Software

agursc.sty agursc-sample.tex agursc.txtLaTeX sty file used for publications in AGU Radio Science. The file agursc-sample.tex shows an example of how to use the sty file to produce layout ready copy for AGU.
complex.2.0.tar.ZComplex dense linear solver from:
T. Cwik, R. van de Geijn, and J. Patterson, "Application of Massively Parallel Computation to Integral Equation Models of Electromagnetic Scattering (Invited Paper)," J. Opt. Soc. Am. A, Vol. 11, No. 4, April 1994.
cyl.fCalculates exact series solution for RCS of an infinite cylinder.
dte.fand dbess.f(required by dte.f)
by Keith Lysiak

"... calculates the exact solution for the near fields in and around a 2-D cylinder. This is for the 2-D TE case. ... The code is for "near" fields and due to the limits on the number of HANKLE functions, it will not work if a large area relative to the size of the cylinder is chosen. The code could be modified to perform far field approximations to eliminate this problem. ... I also have coding for the TM case but it has not been thoroughly checked out. I provide it on an individual case with that understanding. I can be contacted at: klysiak@swri.edu".
grating.f grating.txtby Tom Cwik. Computes the exact reflection and transmission coefficients for a p.e.c. strip grating. For this exact solution, the strip width to cell size ratio is 0.5 and the excitation is normally incident. The solution is due to Weinstein using the factorization method.
kdps.tar.Z kdps.txtby Bengt W Littmann. Mode matching program calculating the scattering parameters of a waveguide cross-section jump. See kdps.txt for more info on opening files.
miev.tar.ZCalculates scattering from homogeneous or conducting sphere for a wide range of arguments; MIE series solution.
MOMIC, a user-oriented method-of-moments PC program, suitable for analyzing the electromagnetic behaviour of arbitrarily shaped wire antennas and scatterers, modeled by piecewise linear segments, in free space. The code is provided freely for non-commercial usage.
monopole.f monopole.txtby Louis Wilson. Calculates the fields of a monopole on a circular ground plane using the Uniform Theory of Diffraction using a formulation by Dr. Robert Kouyomjian. Operation is interactive and the output is a file (monopole.dat) of angle (degrees) and normalized field (deciBels). The program is set up to output from 0 to 360 degrees in 1 degree increments.
polar_plot.tar.Z polar_plot.txtby Louis Wilson. PostScript polar plotting program
powerSmith.zipPC version of RF modeling tool and Smith Chart. With s-parameters, stability circles, gain circles and noise circles. AutoMatch function and fine tuning of composite components. By David Tomanek and Martin Kratoska (ok1rr@qsl.net)
rel_error.fby Marco Kunze. Calculates the relative error in the infinity-norm in "Ax" if Ax = b
smith-ps.f smith-ps.txtby Louis Wilson. Plots normalized impedance data on a smith chart. Sample input file is included in monopole.txt. The output is a file (smith.ps) in Postscript format.
stack.forby Barry Chambers.
"... Calculates and plots the variation with frequency of the reflection and transmission coefficients for a stack of lossy dielectric layers with optional interface impedances. The incident wave may be at any angle and have either parallel or perpendicular polarisation. The software is based on theory given in the book: "Radar Cross-Section" by Knott, Schaeffer and Tuley (Artech House 1993) and can be used to design multi-layer windows or radar absorbers."
tscht.fby Marco Kunze. Calculates the Tschebyscheff-Polynomials T of the first order. The argument of the polynomials is real.
tschu.fby Marco Kunze. Calculates the Tschebyscheff-Polynomials U of the second order. The argument of the polynomials is real.
xyfdtd.tar.Zby Louis Wilson. 2 dimensional Finite-Difference Time Domain demo program using the Yee algorithm and Mur absorbing boundary conditions. Uses X-windows to display the wave propagation. The input file contains all the input parameter definitions with a sample case.
zeros.f zeros.txtby Louis Wilson. This subroutine computes the zeros of the Bessel function J or its derivative J' and stores a table to an array. This array may be written to a file for later use. It can be used to compute cylindrical waveguide modes.
MATLAB macro files.
vswr.m : Simple vswr plotter
radpat.m : Radiation Pattern plotter
smith.m : Smith Chart plotter
gkeybox.m : Legend Box automator (used with *.m plotters above)
polarplot.m: Plots up to three radiation patterns with choices of line type, grid type, axis labeling etc.

Unhappy with our software selection? Or our file formats?
We will gladly accept any software to add to this page, or any other comments.
Drop us a note: emstaff@emlib.jpl.nasa.gov

[Local Free Software]
[Non-local Software]
[Software from Books]
[EMLIB Home Page]

Non-local Software

Ansys/Emag, a finite element code from Ansys Corp. This code is commercial.
APLAC, a general purpose nonlinear circuit, system, and electromagnetic FDTD simulation and design program, from the Circuit Theory Laboratory of the Helsinki University of Technology, Nokia Research Center, and Nokia Mobile Phones. This code is commercial, and free demo versions are available.
ATLASS: Advanced Transmission Line Analysis and Synthesis System. This code, from ElectroMagneticWorks Inc., is commercial.
Boundary Element Method Codes: A set of Fortran codes for carrying out the central task in solving the Helmholtz equation via the BEM in a variety of domains. The codes use the simplest elements, are easy to use, versatile and efficient. They are for use in DC (electrostatics) and AC (electromagnetics), and were written by Stephen M. Kirkup. These codes are non-commercial.
CARMEN is the advanced 3d rotating machine module for full rotational analysis from Vector Fields, and forms part of the OPERA-3d suite of software. This is a commercial code.
CFD-Maxwell / CFD-Maxwell-Suite, a newly developed 3D FDTD solver for arbitrary structured and unstructured meshes. Packages contains 2 preprocessors: CFD-GEOM (classical model generation) and CFD-Micromesh (microelectronics/optics process emulator) as well as the postprocessor CFD-VIEW (MPEG-1 and MPEG-2 movie creation capability) Available for i386 (Win/Linux) as well as most RISC boxes. This code is commercial. (Free beta licenses through 12/31/2001)
CONCERTO is an advanced new software package for microwave design from Vector Fields. It uses the powerful Finite Difference Time Domain method in conjunction with a unique technique known as conformal meshing which allows the use of non rectangular grids that conform more precisely to curved surfaces. This easy to use package is fast, flexible and accurate. In use by academic and industrial users all over the world, the applications covered include waveguide components, antennas, resonators, microstrips and microwave heating. This is a commercial code.
COSMOS/M, finite element modeling, meshing, visualization, and analysis software from Structural Research and Analysis Corp. This code is commercial.
CST Microwave Studio, efficient and accurate Modeling of High Frequency Devices, based on the Finite Integration Theory combined with PBA (Perfect Boundary Approximation). This code is commercial.
Electric Field, a visual demonstration of electric fields intended for students, from Socrates Software. This code is commercial.
ELEKTRA is the dynamics analysis module for ac or transient excitation with linear or non-linear materials from Vector Fields. Rotational or linear velocity problems can also be modelled, and forms part of the OPERA-3d suite of software. This is a commercial code.
Dr. Atef Z. Elsherbeni's page of Recently Developed EM Related Software. These codes are non-commercial.
EM-Interplay, EM-Aerial and EM-Visual, three products from Panoramic Technology that provide 3-D electromagnetic field simulation for advanced semiconductor lithography from Panoramic Technology. EM-Interplay interfaces to UC Berkeley's FDTD electromagnetic simulator TEMPEST or to Panoramic Technology's TEMPESTpr. These codes are commercial.
EM3DS is a MoM-based full-wave solver for planar structures, able to handle thick lossy conductors and dielectric discontinuities rigorously, so suitable for MMIC analysis, including MEM switches, CPW etc. It is able to perform coupled Electromagnetic/Acoustic analysis for bulk acoustic wave resonators -in particular FBAR-. It includes the ability to model distributed active devices in linear operation (FET). It also addresses the analysis of a class of 2-port waveguide components. A completely free (but with some functional limitations) version -FreeEM3DS- as well as the full version (to be enabled for 60 days) with manuals and examples are available at www.memresearch.com/download.htm.
EMA3D, three dimensional time domain finite difference solution of Maxwell's equations from EMA, Inc. This code is commercial.
EMAP, a family of 3-D finite element codes from the University of Missouri at Rolla's EMC lab. These codes are non-commercial.
EMFlex: the time-domain finite element solver for Maxwell's equations, developed by Weidlinger Associates Inc. This code is commercial.
EMIT, a set of modeling tools for EMI modeling, including MoM and FDTD kernels, from SETH Corporation. This code is commercial.
EMLAB, an FDTD-based 2D and 3D electromagnetics tool suite including a graphical modeling tool and an automatic grid generator. Target applications are RF, Microwave and millimeter wave applications, and photonic applications, from ISE Integrated Systems Engineering AG. This code is commercial.
Empire, a versatile 3D electromagnetic field simulator developed at the IMST. It is based upon the powerful 3D-Finite Difference Time Domain Method (FDTD). Scattering parameters, radiation patterns, field plots etc. are generated for a user defined frequency range within only one simulation process. A smart 3D editor, which is part of the Empire Basic Package can be used for structure definition. AutoCADTM, a well known mechanical desktop program, can be used as the Graphical User Interface (GUI), too. Monitoring and animation can give physical insight into the electromagnetic wave phenomena while accurate results are obtained with little effort. The code is commercial.
EMPLAN is a computer software to perform full-wave electromagnetic (EM) analysis of printed multilayer circuits. Its formulation is based on the mixed potential integral equation employing spatial-domain closed-form Green's functions. This code is commercial; a demo version is also available.
EMPOWER, a planar 3D electromagnetic simulator for MIC, MMIC and other planar RF/microwave circuits. It may be used standalone to generate S-parameter data and with GENESYS suite to integrate synthesis, schematic entry, layout, circuit theory and electromagnetic simulation. This code is commercial.
EMS is a 3D-field simulator for low frequency electromagnetic and electromechanical applications. EMS combines a high level of functionality and accuracy with ease-of-use, and is applicable in a wide variety of designs. This code is commercial.
EMSightEMSight is a Windows 95/NT based electromagnetic simulator for analyzing and the behavior of high-frequency, RF and microwave circuits and antennas. EMSight can analyze arbitrary planar circuits including interconnecting vias on an unlimited number of dielectric layers with an unlimited number of ports. The code is commercial; a 30-day demo is available.
Emu/fdtd, a 3D Maxwell solver, from Brunel University's Parallel FDTD Project. This code is commercial, but may be freely available under some conditions.
Ensemble, a planar electromagnetic field simulator from Ansoft. This code is commercial.
Equipotential Surfaces and E Lines, 3D Software for calculation and visualization of equipotential surfaces and electric field lines with topographic view and deals with many kinds of charges (dotive, linear, page..sphere, di electric). The program runs on PC computers with Win95 compatible operating systems, the downloaded version will work will all features for 30 times, then the user will decide to buy it or not.
FastCap and FastHenry, tools developed at M.I.T. for the solution of Maxwell equations and extraction of circuit parasites (inductance and capacitance). These codes are free.
- FastCap ftp site: the source files for the Unix version, the original docs, the articles explaining the algorithms implemented in the software
- FastHenry ftp site: the source files for the Unix version, the original docs, the articles explaining the algorithms implemented in the software
- Windows versions of FastCap and FastHenry
FEKO (South African site and US mirror site) is a numerical electromagnetics code based on the Method of Moments for solving general electromagnetics radiation and scattering problems. In order to solve electrically larger structures, the MoM has been hybridized with high frequency techniques such as Physical Optics and the Uniform Theory of Diffraction. This code is commercial.
FEMLAB, a general purpose finite element code based on MATLAB for electromagnetics, photonics and multiphysics modeling. This code is commercial.
FEMM (Finite Element Method Magnetics) addresses 2-D planar and axisymmetric magnetic problems (including linear and nonlinear magnetostatic problems and low frequency harmonic problems,) for Windows. This code is shareware.
FIMMWAVE and FIMMPROP-3D are rigorous EM codes from Photon Design, aimed at the optical domain, using efficient, fast modal decomposition techniques, with bidirectional, full vector, anisotropic propagation capability, in 2D and 3D, as well as near omni-directional capability in 2D. These codes are commercial.
Flux3D and Flux2D, finite element codes from Magsoft Corp. These codes are commercial.
FullWave, a PC-based 3-D finite-element code from Infolytica Corp. This code is commercial.
Gemini, a PC-based 2-D finite-element code from Infolytica Corp. This code is commercial.
GetDP, a scientific computation program for the numerical solution of integro-differential equations, using finite element and integral type methods. The software is free.
GRASP8W, a set of tools for analysing general reflector antenna systems. The software package calculates the electromagnetic radiation from systems consisting of multiple reflectors with several feeds and/or feed arrays using advanced, state-of-the-art analysis methods. These comprise Physical Optics, Physical Theory of Diffraction and Uniform Geometrical Theory of Diffraction. To assist the user in setting up the scattering geometry as well as in visualising the results, the software package also includes a graphical interface in the form of pre- and post-processors. The software, developed by TICRA, is commercial. A Student Edition, GRASP8W-SE, is available as freeware for both Windows and Linux platforms.
Harmonica, a frequency domain circuit simulator for linear and non-linear design from Ansoft. This code is commercial.
HFSS, a finite element code from Ansoft. This code is commercial.
HFSS, a finite element code from Hewlett Packard. This code is commercial.
HFWorks is a fully 3D field simulator for RF, Microwave, and Wireless applications. These applications include: dielectric resonators, oscillators, tuning elements, waveguide twists and bends, waveguide tees, directional couplers, isolators, circulators, attenuators, antennas, high Q filters, etc. This code is commercial.
IE3D, a PC-based full- wave EM simulation tool, from Bay Technology Inc. This code is commercial.
LC, a simulation tool for the design of high-speed interconnects based on a 3-D FD-TD algorithm, from Silicon Graphics, Inc. This code is commercial, but freely available for Cray and SGI platforms.
LINMIC+/N, the Microwave & RF IC Design Suite - mostly electromagnetics-based software for high frequency RF and microwave IC design and layout (GDS-II,DXF,..) from AC Microwave (formerly Jansen Microwave). The CAD package features interactive design speed and includes optimization, device modeling and nonlinear simulation. This code is commercial; a demo version is also available.
lucernhammer is a radar cross section prediction suite which analyzes arbitrarily shaped facetized 3D target models. It uses Physical Optics, the Physical Theory of Diffraction, and the Shooting and Bouncing Ray method for higher-order contributions. 100% C, parallel processing, portable to many different platforms. Available as a free beta to United States Government agencies, contractors, and qualified educational institutions.
Mafia, a Simulation Tool for Electromagnetic Analysis and Design, based on the Finite Integration Theory. This code is commercial.
MagNet, finite-element software from Infolytica Corp. This code is commercial.
MaX-1, a PC-based CEM code, from the Swiss Federal Institute of Technology's Electromagnetic Code Designers Group. This code is commercial. A demo version is available.
Maxwell 2D and 3D field simulators from Ansoft, Inc. These codes are commercial.
Maze series of codes, 3-D PC-based finite element software from Field Precision. These codes are commercial.
MEFiSTo for Windows 95/98/NT is a highly interactive time domain electromagnetic simulator with a VirtualElectromagnetics Laboratory for both academic and research applications, based on the TLM method. It is available from Faustus Scientific Corporation. This code is commercial.
MEGA, solves electromagnetic differential equations using the finite element method, from the University of Bath's Applied Electromagnetics Research Centre. This code is commercial.
Mesh-TV, an interactive graphical analysis tool for visualizing and analyzing data on 2D and 3D meshes from Lawrence Livermore National Laboratory. This software is non-commercial.
Micro-Stripes, 3-D TLM software from Flomerics. This code is commercial.
MMP, the multiple multipole program, from the Swiss Federal Institute of Technology's Electromagnetic Code Designers Group. This code is commercial. A demo version is available.
Momentum a planar finite element code from Hewlett Packard. This code is commercial.
MultiSTRIP, written to analyze and design multilayered arbitrary shaped microstrip antennas on multiple dielectric layers. The solution is done by rigorous solution of integral equation via Galerkin Method (Moment Method) and using the correct Greens functions. The code is non-commercial.
MyWebTA is a web site that contains interactive educational EM simulations (applets). The web site is commercial as access to the simulations is provided for a nominal yearly fee.
NEC, the Numerical Electromagnetics Code.
Two unofficial web sites containing the non-commercial software exist:
- one is maintained by Ray Anderson
- one is maintained by Peter Richeson
NECSee, a visualization tool for antennas, which operates on NEC output files. One version is free, the enhanced version is commercial.
NEC-Win Pro and NEC-Win Basic, PC-based GUIs for the NEC code, from Nittany Scientific. These codes are commercial.
QuikNec Antenna Software, which generates geometries used in antenna simulations, usable under Windows, from ThinkWireless, Inc. This code is commercial.
SuperNec 1.53, is a hybrid Method of Moment (MoM) / Unified Theory of Diffraction (UTD) antenna analysis program. The Matlab graphical interface that sets this product apart from the rest was developed by Dr Nitch. SuperNEC 1.53 incorporates ready made antenna assemblies,support for dielectric-coated wires and context sensitive help. SuperNEC 1.53 is free for non-commercial use to everyone who has Matlab 5.2 or better.
Other information and links about NEC, written by Dave Michelson, is also available.
Netlib, a vast collection of mathematical software, files, reports, etc... This software is non-commercial.
Numerical Recipes Home Page
Numeric Python EM Project
OPERA-2D suite of finite element software from Vector Fields includes modules for static and time varying electromagnetic field modelling in 2 dimensions. The interface to OPERA-2d allows easy geometry input and advanced output options. A scripting language is available for automation. Statics (ST): The static analysis module for electrostatic & magnetostatic calculations, linear & non-linear materials. Dynamic (AC/TR/VL): The dynamic analysis module for ac transient and velocity (linear or rotational) calculations. Rotating Machine (RM): The rotating machine module for full rotational motion including mechanical effects and variable speed. Space Charge (SP): The space charge module for full space charge analysis of particle beams including a large library of emitter surfaces. Mechanical (SA/TH): The Stress and thermal analysis module allows input from electromagnetic analysis or stand alone operation. Design Environment (DE): The design environment allows full parameterisation of models with separate user and engineer interfaces. This is a commercial code.
OPERA-3D suite of finite element software from Vector Fields includes modules for static and time varying electromagnetic field modelling in 3 dimensions. The 3D modules include TOSCA, ELEKTRA, CARMEN and SCALA, with a dedicated geometric modeller for easy geometry input, and an advanced post-processor. A scripting language is available for automation. of model creation, analysis, and result processing. This is a commercial code.
POISSON/SUPERFISH and other software maintained and distributed by the Los Alamos Accelerator Code Group. These codes are non-commercial.
ProMAX/2D from FINLE Technologies, determines the electric field beneath a complex 2-dimensional mask cross-sectional structure using the FDTD algorithm. This code is commercial.
QuickField, simulation software for EM, heat transfer and stress analysis, for PCs under MS DOS or Windows.
- QuickField main site, for information on the commercial software.
- QuickField support site, for technical support and a shareware version.
Quick Wave 3-D, a general purpose electromagnetic simulator based on the finite-difference time-domain method with new models and procedures.
RFMATCH, a graphic impedance calculator. The program can be used to match sources to loads with networks made with impedances, inductors, capacitors, transmission lines, stubs and transformers. Frequency and components can be trimmed on line and the result is imediately shown. Frequency sweep and Monte Carlo simulation can be used to evaluate the behaviour of the matching network. Autotuning helps the user to find a solution to matching problems. A pop-up calculator for complex numbers is also included. This PC program is freeware.
SABOR (Software de Análisis de BOcinas y Reflectores, Software for the analysis of Horns and Reflectors), a pre-design and educational program for computing radiation patterns for both horns and reflectors, This code is for PCs under Windows. This code is shareware.
SCALA is the space charge module for full space charge analysis of particle beams including a large library of emitter surfaces. The module forms part of the OPERA-3d suite of software from Vector Fields. This is a commercial code.
SCATMECH, a public-domain library containing a variety of C++ codes implementing theories and models for the scattering of polarized light by roughness, subsurface defects, and particles on surfaces and thin films. Also contains code for Mie scattering, for handling the Stokes-Mueller and Jones representations of polarized light, for reflection and transmission of light by dielectric thin films, and for handling the optical properties of materials. These codes are non-commercial.
SI 2D and SI 3D, electromagnetic field simulation and SPICE analysis for high speed signal integrity design codes from Ansoft. The codes are commercial.
SLIM, a comprehensive suite of software for the finite element analysis of EM fields. Its modular arrangement contains facilities for mesh generation, field solution and post processing of field data in 2D, axi-symmetric and 3D geometries. Modeling encompasses static, dynamic and transient studies, motion (rotating machines, actuators),non-linearity, eddy currents. Free evaluation software available.
Sonnet Suite, 3-D MoM Planar High-Frequency Electromagnetic Software, from Sonnet Software Inc. This code is commercial. Also available is a free version with some restrictions, Sonnet Lite.
Space and Naval Warfare Systems Center Software - Various high-fidelity EM propagation models, databases, and DOS/Windows95/NT assessment systems for evaluating the effects of complex atmospheric environments and terrain upon 100MHz to 57GHz propagation. These codes are non-commercial.
SuperNEC, see SuperNEC, under NEC
TKC101: Includes Specmaster and Clock Architect. Specmaster presents commercial EMI specs and provides distance scaling for radiated emissions limits, worst case of US and international specs. Clock Architect facilitates "tweaking" of clock frequencies so as to avoid harmonic coincidence at frequencies where emissions are of concern. Radiation Profiler: radiation from microstrip transmission line, both resistive and reactive loads. These codes are from TKC and are commercial.
Symphony, a high frequency system simulator for the analysis and design of communication systems from Ansoft. This code is commercial.
TLM Program, an implementation of the TLM method from the University of Victoria's TLM Modeling Group. This code is non-commercial.
Michael I. Mishchenko's T-matrix codes for computing 3D scattering by rotationally symmetric dielectric particles in fixed and random orientations. These codes are non-commercial.
TOSCA is the renowned static analysis module for electrostatic and magnetostatic calculations from Vector Fields. It uses the finite element method for linear and nonlinear material modelling, and forms part of the OPERA-3d suite of software. This is a commercial code.
ToyFDTD is a series of heavily-commented source codes demonstrating implementation of 3-dimensional FDTD capabilities and published under the GNU General Public License. The first in the series, ToyFDTD1, is a stripped-down, minimalist, 3D FDTD code illustrating the basic tasks in implementing a simple 3D FDTD simulation. Also available are ToyFDTD2, ToyFDTD3, ToyFDTD4...
In a similar spirit, though not heavily commented, the CEMTACH group also offers ToyPlaneFDTD, a 2-D FDTD code, and ToyTLM, a 3-D TLM code. Just added is a Discussion Board for swapping ideas about getting your FDTD code to work right...
TriComp, 2-D PC-based finite element software from Field Precision. This code is commercial.
Wave2D, a 2-D finite element code from Magsoft Corp. This code is commercial.
Westbay Tools for Windows, a collection of tools for performing a wide variety of EMC related tasks, Westbay Computfilt for Windows, a simple tool to help diagnose and solve conducted interference problems, Westbay Auditor, EMC shielded enclosure design review, and Westbay FasTrack, simulation of a digital signal on pcb track acting as a transmission line, are from Westbay Technology Limited. These codes are commercial. Evaluation copies are available.
xfdtd, user-friendly 3-D FDTD software, from Remcom, Inc. This code is commercial. Demo copies are available.
Xwake, a user-friendly Body of Revolution (BOR) Finite Difference Time Domain (FDTD) code for wake potential and impedance calculations of rotationally symmetric structures, from Fermilab. This code is non-commercial.

Unhappy with our software selection? Or our file formats?
We will gladly accept any software to add to this page, or any other comments.
Drop us a note: emstaff@emlib.jpl.nasa.gov

[Local Free Software]
[Non-local Software]
[Software from Books]
[EMLIB Home Page]

Software from Books

Computational Methods for Electromagnetics, by Peterson, Ray, and Mittra, (IEEE Press, 1998):
FORTRAN software: including routines to implement a pulse basis function, source-field calculations, and a first-order finite element solution of the scalar Helmholtz equation.
EMC Analysis Methods and Computational Models, by Tesche, Ianoz and Karlsson, (John Wiley & Sons, 1996):
Windows-based software: including a transmission line analysis code, a transmission line code having advanced riser modeling, a code for computing lightning-induced surges in a transmission line, and a program to evaluate the E and H-fields over and in the earth.
Field Solutions on Computers, by Humphries, (CRC Press, 1998):
TCE, a finite-element package.
The Finite Difference Time Domain for Electromagnetics, by Kunz and Luebbers, (CRC Press, 1993):
routines from the book.
Finite Element Method for Electromagnetics, by Volakis, Chatterjee, and Kempel, (IEEE Press, 1999):
software from the book.
Scattering of Electromagnetic Waves, v.1 by Tsang, Kong, and Ding, 2000, v.2 by Tsang, Kong, Ding, and Ao, 2001, v.3 by Tsang and Kong, 2001, (John Wiley & Sons): EM Wave MATLAB Library, with theory and formulation as described in the book.

Unhappy with our software selection? Or our file formats?
We will gladly accept any software to add to this page, or any other comments.
Drop us a note: emstaff@emlib.jpl.nasa.gov

[Local Free Software]
[Non-local Software]
[Software from Books]
[EMLIB Home Page]

http://emlib.jpl.nasa.gov/EMLIB/email.html
Last modified: 28 January 2002